פלקס - FLEX
מ.א.מ וינברג ייבואן רשמי של מוצרי – LEISTER ו- FLEX כולל שירות תיקונים מקצועי.
כלים ידניים - חדשים
צור קשר
Central water supply through gear shaft: for wet polishing of granite and marble
Quick-fit brass coupling: for 1/2" water hose
Rugged metal composite housing for optimum heat dissipation
Contour plug: can be connected only to an isolating transformer. For safety reasons, operation is permitted only connected to the FLEX TT 2000 isolating transformer
This machine is also available in 110 V
1600 watt wet stone polisher with plug for isolating transformer, 130 mm | Order no. 276.375
Max. polishing pad diameter130 mm
No load speed1750 rpm
Power input1600 watt
Power output1040 watt
Tool fixtureM 14
Cable length4,0 m
Weight5,1 kg
VR full-wave electronic control: tachogenerator constant speed control, soft start, overload protection and speed selection
Central water supply through gear shaft: for wet polishing of granite and marble
Quick-fit brass coupling: for 1/2" water hose
Contour plug: can be connected only to an isolating transformer. For safety reasons, operation is permitted only connected to the FLEX TT 2000 isolating transformer
This machine is also available in 110 V
1800 watt wet stone polisher with plug for isolating transformer, 130 mm | Order no. 258.597
Max. polishing pad diameter130 mm
No load speed800-2400 rpm
Power input1800 watt
Power output1200 watt
Tool fixtureM 14
Cable length4,0 m
Weight4,3 kg
Powerful 1150 W motor
VR full-wave electronic control: tachogenerator constant speed control, soft start, overload protection and speed selection
High torque for maximum material removal and optimum surface quality
Powder-coated and varnished magnetic pad for a long service life, thanks to the additional protection against wear and abrasive dust
Grip hood for easy handling and precise working
Bail handle: Secure grip, even when working on vertical surfaces
The new water feed and control system is located below the housing, which makes operation and precise dosing easy. An unobstructed grip area is provided directly above the backing pad
2 m special hose: No additional hose safety devices required. Increases flexibility, reduces weight and prevents risk of injury from hose clips
Quick-fit brass coupling: for 1/2" water hose
Contour plug: can be connected only to an isolating transformer. For safety reasons, operation is permitted only connected to the FLEX TT 2000 isolating transformer
Spindle lock
This machine is also available in 110 V
1150 watt wet stone polisher with variable speed, plug for isolating transformer, 115 mm | Order no. 368.660
Max. polishing pad diameter115 mm
No load speed1200-3700 rpm
Power input1150 watt
Power output700 watt
Tool fixtureM 14
Size (L x H)350 x 140 mm
Connecting hose with quick coupling2 m
Cable length5,0 m
Weight2,4 kg
VR microprocessor control: with tachogenerator constant speed control, soft start, continuous speed control trigger, restart protection after power failure, overload protection, temperature monitoring and speed selection
8 mm orbit for high efficiency
Permanent direct drive for an even polished surface
Cushioned special hook and loop pad for polishing.
Removable, ergonomic handle and guard for optimum handling in all applications
Low heat generation on the surface makes it ideal for temperature-sensitive paints
Counterweight for smoother operation
Low height and low weight
Spindle lock
This machine is also available in 110 V
Positive-drive orbital polisher | Order no. 322.008
Max. polishing pad diameter160 mm
Velcro backing pad Ø140 mm
No load speed160-480 rpm
Orbit8 mm
Orbit rate, no load3200-9600 opm
Power input1010 watt
Power output590 watt
Cable length4,0 m
Weight2,6 kg
Large, rugged single-speed gear unit with optimum gear ratio for high torque
Full-wave electronic control: with soft start, temperature monitoring, overload protection and accelerator switch – for a controlled run-up to the optimum mixing speed. Sustained power in all speed ranges
Comfortable 3-level switch can be reached from the grip position without interrupting work, protected by a rubber sleeve. Level 1: cleaning, level 2: stirring up, level 3: mixing
On/off switch with lock and protection at power interruption. Ideal for stationary operation in a mixing station
The flexible rubber sleeve over the on/off switch prevents the ingress of dirt. No malfunctions caused by jammed switches
Ergonomic handles on the drive unit: low weight, fatigue-free arm posture and upright body posture allow comfortable, ergonomic operation
Four corner guards with rubber buffer provide secure storage during transportation and offer protection against shocks and impacts at the building site
Protective cap above the motor housing guides the cooling air flow and prevents the ingress of rain water
Spindle lock with start-up protection. Simplifies exchange of the mixing paddle
For mixed applications up to 60 kg
With mixing paddle for mixture: pasty to tough. Tile adhesive, grout, filler compound, adhesive, finished plaster, adhesive mortar.
1200 watt 1-speed mixer with 3-level speed switch | Order no. 433.233
No load speed0-210/325/530 rpm
Power input1200 watt
Power output710 watt
Tool fixtureM 14
Clamping collar Ø53 mm
Max. mixing paddle Ø140 mm
Size ( W x L x H)405 x 215 x 340 mm
Cable length4,0 m
Weight (without mixing paddle)4,5 kg
VR electronic control: stepless speed selection, tachogenerator-controlled constant speed, overload protection, re-start protection and temperature monitoring
Completely cast electronic components prevents damage due to metal dust. The 3-fold winding protection reduces motor wear, increases service life
Grip hood for easy handling and precise working
With interchangeable head system for round- and triangular sanding head for sanding close to edges
Effective dust extraction from between the brush ring and the sanding pad prevents clogging of the abrasive and promotes a dust-free working environment
Defined hose guidance and effective dust extraction due to large hose cross-section. The suction hose is directly attached to the tool by the FLEX clip-system
Lightweight and easy-to-use on small surfaces, tight spaces
Ideally suited for sanding plaster boards, solid styropor insulation slabs, preparation for painting
Machine without sanding head as an addition for the Vario-Giraffe® WST 700 VV and WST 700 VV Plus
Handy-Giraffe® wall and ceiling sander | Order no. 377.821
Power input710 watt
Power output420 watt
No load speed600-1950 rpm
Corner sander no-load speed 1800-5400 opm
Sanding disc Ø225 mm
Size ( W x L x H)330 x 120 x170 mm
Cable length4,0 m
Weight2,8 kg
VV electronic control: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel
Using a unique telescopic system, the Vario-Giraffe® adapts to your needs. Length adjustable from 1330 mm – 1730 mm. Open telescope lock lever, pull out handle and close lever. Handle rotates through 360°
Adjustable locking screw for telescopic extension
Ergonomic design with many different handling possibilities for fatigue-free working. The motor is always kept between the gripping positions, ensuring a perfect balance
Fitted with interchangeable heads that are attached and removed with a click
Including triangular sanding head. This is optimally suited to sanding corners and edges. The random orbital movement of the sanding head takes the abrasive right up to the edges
Backing pad with velcro face
The articulating sanding head can be adjusted to every tilt and angle.
Vacuum cleaning system: guard with a brush ring, flexible suction hose from the sanding head to the guide tube. Connection facility at the rear of the telescopic tube for FLEX safety vacuum cleaner
Effective dust extraction from between the brush ring and the sanding pad prevents clogging of the abrasive and promotes a dust-free working environment
The brush ring is spring-mounted so that the round sanding head accurately follows all uneven contours. This allows the head to be applied with fingertip precision and also prevents any dust escaping
Ideally suited for sanding plaster boards, solid styropor insulation slabs, preparation for painting, polishing
This machine is also available in 110 V
with vacuum hose
Vario-Giraffe® wall and ceiling sander | Order no. 350.338
Power input710 watt
Power output420 watt
No load speed1100-1700 rpm
Corner sander no-load speed 3300-5100 opm
Sanding disc Ø225 mm
Dimensions in mm1330-1730
Cable length4,0 m
Weight4,8 kg
Highly efficient and resilient motor for more power output
VR full-wave electronic control: tachogenerator constant speed control, soft start, overload protection and speed selection
Sanding belt tension: spring loaded, adapts to pipe diameter from 10 to 250 mm
Sanding belt dimension: 618 x 40 mm
Sanding belt replacement: quick and easy
Hand grip directly over the sanding belt for fatigue-free work
Infinitely adjustable belt speed
Grinding weld seam directly on front contact roller with locked front swing arm
Grinding pipes: between two rollers with unlocked front swing arm. The grinding belt wraps around the pipe and adapts to the pipe diameter
This machine is also available in 110 V
1200 watt weld and pipe belt sander | Order no. 282.499
Power input1200 watt
Power output700 watt
Belt speed10-30 m/sec
Belt dimensions618 x 40 mm
Cable length4,0 m
Weight4,2 kg
Highly efficient and resilient motor for more power output
VE electronic control: for infinitely adjustable belt speed
Sanding head: rotates through 140°. For use with sanding arms in 9 mm or 30 mm
Sanding arm adjustable for 520 mm and 533 mm belt lengths
Processing length sanding arm up to approx. 12 cm
Quick belt replacement system: for quick, tool-free belt replacement
Belt file | Order no. 420.530
Power input800 watt
Power output325 watt
Belt speed4-12 m/sec
Belt dimensions520/533 x 4-9 mm
Cable length4,0 m
Weight2,4 kg
Microprocessor control: speed selection, tachogenerator constant speed control, soft start, restart protection after power failure, overload protection and temperature monitoring
Unique tool attachment with quick-action coupling for tool-free changing of the system attachments for burnishing and pipe belt sanding
Completely cast electronic components prevents damage due to metal dust. The 3-fold winding protection reduces motor wear, increases service life
Sanding belt replacement: quick and tool-free
Sanding belt dimension: 760 x 40 mm
High-quality, spring-mounted sanding arm: light alloy with 2 deflection rollers. For optimum wrap-round on pipes, up to max. 270°
Single-pole switch
Spindle lock
Pipe belt sander TRINOXFLEX Set | Order no. 433.446
Power input1400 watt
Power output880 watt
Belt speed3,5-10 m/sec
Belt dimensions760 x 40 mm
Pipe Ø max.125 mm
No load speed1000-3500 rpm
Cable length4,0 m
Weight3,6 kg
Microprocessor control: speed selection, tachogenerator constant speed control, soft start, restart protection after power failure, overload protection and temperature monitoring
Unique tool attachment with quick-action coupling for tool-free changing of the system attachments for burnishing and pipe belt sanding
Variably adjustable burnishing attachment, allows working close up to the edge, also suitable for narrow rollers, incl. edge guide
Tool-free grinding tool change via a patented quick-change system
Completely cast electronic components prevents damage due to metal dust. The 3-fold winding protection reduces motor wear, increases service life
Adjustable guard: for sanding tools up to Ø 125 mm
Single-pole switch
Spindle lock
For optimum finishing of various materials, for burnishing, texturing, polishing, brushing, smoothing, de-rusting and deburring steel and stainless steel surfaces
Burnishing machine TRINOXFLEX | Order no. 433.411
Power input1400 watt
Power output880 watt
Max. tool Ø125 mm
Tool width100 mm
Tool fixture19 mm
No load speed1000-3500 rpm
Cable length4,0 m
Weight2,9 kg
פלקס Flex היא בין החברות המובילות ביותר בתחום של כלי עבודה חשמליים. מבחר המוצרים שלה מצליחים לשרת בצורה הטובה ביותר עסקים ומגוון נותני שירות בכל העולם. רוצים גם? הגעתם למקום הנכון!
חברת מ.א.מ פועלת כבר עשרות שנים, משנת 1961, בענף האספקה הטכנית. חברתנו מציעה לכם כלי עבודה חשמליים לביצוע מגוון עבודות.
כדי לאפשר לכם לספק ללקוחותיכם את העבודה הטובה ביותר, ולבצע את עבודתכם בצורה מקצועית, נוחה וברמה גבוהה, אנו מזמינים אתכם להסתכל במלאי שלנו, בו תמצאו כלים של אחת היצרניות הטובות ביותר- Flex.
למה בחרנו לשווק את חברת פלקס FLEX?
"אתם צריכים כלי עבודה טובים כדי לעשות עבודה טובה"- זהו המוטו של חברת פלקס FLEX. היצרנית דוגלת ביצירת כלים ברמה הגבוהה ביותר כיוון שבעל המקצוע הוא זה שקובע את הסטנדרטים ואת איכות התוצאה הסופית. לשם כך, היא ביקרה בכל המקומות שבהם נהוג לעבוד עם כלים כאלו ואחרים, כדוגמת מפעלים, מוסכים ועוד, על מנת שתוכל לפתח מכשירים חדשים, טובים יותר. הדבר הראשון שמתייחסת אליו החברה בתהליך פיתוח המכשירים שלה היא העמידות ואריכות החיים שלהם, ובהתאם לכך הכוח והשימושיות שלהם.
מלבד זאת, פלקס נותנת דגש גם למראה ולעיצוב של כלי העבודה שהיא מייצרת ולהיבט הבטיחותי בעת השימוש בהם. וכמובן, החברה נותנת חשיבות רבה גם לטכנולוגיה המתקדמת של הכלים שמספקת למשתמשים בהם פתרונות חדשים.
כיום, המוצרים של חברת פלקס נמכרים במדינות רבות בכל רחבי העולם ואת מוצריה רוכשים מיליונים מתחומים שונים. אין ספק שהמכשירים שלה מוכיחים את היעילות שלהם פעם אחר פעם.
פלקס בישראל
כדי שגם אתם תוכלו לקבל גישה למבחר המוצרים האיכותי של פלקס , חברת מ.א.מ גאה להציג בפניכם סוגים שונים של כלי עבודה שפותחו על ידי היצרנית המובילה. בין השאר, מאגר המוצרים שלנו כולל משחזות זווית, מלטשות נירוסטה, מערבלים, מלטשות רכב ואבן, מלטשות קיר וגבס ועוד.
מדוע זה כדאי לכם?
בין אם אתם מספקים שירות למגזר הפרטי ובין אם אתם מספקים שירות למגזר העסקי, עליכם לתת ללקוחות שלכם עבודה מקצועית ואיכותית לשביעות רצונם כדי שתוכלו להגדיל את הרווחים או לשמור עליהם. לא משנה באיזה תחום אתם עובדים, הכלים הם מה שישפיע על התוצאה הסופית, ולכן חשוב שתבחרו את הכלים הטובים ביותר.
כלי עבודה תוצרת פלקס יאפשרו לכם לעשות את העבודה ברמה הגבוהה ביותר ולשביעות רצונם של לקוחותיכם. ולא רק הלקוחות שלכם יהיו מרוצים; כשתתחילו לעבוד עם המוצרים של פלקס מיד תרגישו בהבדל ותגלו שהעבודה שאתם מבצעים יכולה להיות הרבה יותר נוחה עבורכם.
למידע נוסף על המוצרים של פלקס Flex שאנו יכולים לספק לכם, ולסיוע בבחירת הכלים שמתאימים לכם, אתם מוזמנים לפנות אלינו או להביט בעמוד המוצרים.