ציוד הלחמה שוויצרי המוביל
בעולם למקצועי ולתעשייה
לאתר הרישמי

/// מכונות הלחמה

High welding capacity Digital display of temperature, velocity and mains voltage Stepless adjustment of welding pressure Closed-loop control of temperature and drive The ASTRO are used anywhere all over the world. They weld up to five meters per minute. Its robust design and easy handling make it the perfect workhorse.
ASTRO - 230 V / 1800 W / roller 50 mm / EU-plug Article No.: 117.100 Attribute Unit Value Voltage V~ 230 Power W 1800 Temperature °C 80 – 420 Speed m/min 0.8 – 5.0 Welding pressure N 100 – 1500 Weld seam width with test channel mm 2 × 15 Material thickness mm 1.5 – 3.0 Size (L × W × H) mm 430 × 270 × 310 Weight kg 23 USB-memory-stick incl. USB memory stick Conformity mark CE Certification Approval mark Sicherheitszeichen-S-+ Certification scheme CCA Protection class I Protection Class I
Digital display of pressure Acoustic alarm if limit value is exceeded USB memory system The ASTRO and ASTRO USB are used anywhere all over the world. They weld up to five meters per minute. Its robust design and easy handling make it the perfect workhorse. The ASTRO USB allows for the consistent recording of all relevant welding parameters.
Specification ASTRO USB - 230 V / 1800 W / roller 50 mm / EU-plug Article No.: 141.126 Attribute Unit Value Voltage V~ 230 Power W 1800 Temperature °C 80 – 420 Speed m/min 0.8 – 5.0 Welding pressure N 100 – 1500 Weld seam width with test channel mm 2 × 15 Material thickness mm 1.5 – 3.0 Size (L × W × H) mm 430 × 270 × 310 Weight kg 23 USB-memory-stick incl. USB memory stick Conformity mark CE Certification Approval mark Sicherheitszeichen-S-+ Certification scheme CCA Protection class I Protection Class I
Flameless welding of modified bitumen No shrinking of the insulation due to integrated air dam Uniform welding results High working speed Requires only one user to efficiently weld seams (torch weldingrequires two) Welding of modified bitumen sheeting (SBS, APP) with the flameless BITUMAT B2 is much safer than welding with an open flame. The weld strength is significantly better and the single step process makes welding more economical.
BITUMAT B2 - 230 V / 6700 W / 100 mm / CEE-plug Article No.: 138.386 Attribute Unit Value Voltage V~ 230 Power W 6700 Temperature °C 20 - 650 Speed m/min 0.8 – 12 Air flow range % 85 - 100 Width of welding nozzle mm 100 Size (L × W × H) mm 690 × 490 × 330 Weight kg 40 Conformity mark CE Certification Approval mark Sicherheitszeichen-S-+ Certification scheme CCA Protection class I Protection Class I Amperage A 32
Lightweight and compact Digital display of temperature and velocity Closed loop control of temperature and drive Easy and user friendly This compact heavy-duty welding machine is in use worldwide. The small powerhouse is specially designed for the demands of landfills sites, mines and tunnels.
COMET - wedge 50 mm / PE / 230 V / 1200 W / EU-plug Article No.: 107.547 Attribute Unit Value Voltage V~ 230 Power W 1200 Temperature °C 80 – 420 Speed m/min 0.8 – 3.2 Welding pressure N 100 – 1000 Weld seam width with test channel mm 2 × 15 Material thickness mm 0.5 – 3 Size (L × W × H) mm 295 × 250 × 245 Weight kg 7.5 Conformity mark CE Certification Approval mark Sicherheitszeichen-S-+ Protection class I Protection Class I
Smoke-free, low-noise welding using hot-wedge technology Digital temperature and speed display Integrated guiding plates No non-welded edge zones Ideal for indoor applications The COMET works smoke-free and quietly. Thanks to the built-in guide system, the width of the weld zone is uniform – resulting in perfectly welded seams.
COMET SUB-ROOF - 230 V / 700 W / without fitting welding / EU-plug Article No.: 138.276 Attribute Unit Value Voltage V~ 230 Power W 700 Temperature °C 20 – 420 Speed m/min 0.8 – 6 Welding pressure N 100 – 500 Material thickness mm bis 0.8 mm USB-memory-stick optional Size (L × W × H) mm 355 × 250 × 245 Weight kg 7.7 Conformity mark CE Certification Approval mark Sicherheitszeichen-S-+ Certification scheme CCA Protection class I Protection Class I
Digital display of welding pressure Complete recording of all relevant welding parameters. USB memory system designed for use on construction sites Convenient data transfer This compact heavy-duty welding machine is in use worldwide. The small powerhouse is specially designed for the demands of landfills sites, mines and tunnels. Documentation made simple: COMET USB's memory system is designed for use on construction sites. Because this compact hot-wedge welding machine records all relevant welding parameters, data transfer is mere child's play.
COMET USB - wedge 50 mm / PE / 230 V / 1200 W / EU-plug Article No.: 137.626 Attribute Unit Value Voltage V~ 230 Power W 1200 Temperature °C 80 – 420 Speed m/min 0.8 – 3.2 Welding pressure N 100 – 1000 Weld seam width with test channel mm 2 × 15 Material thickness mm 0.5 – 3 USB-memory-stick incl. USB memory stick Size (L × W × H) mm 295 × 250 × 245 Weight kg 7.5 Conformity mark CE Certification Approval mark Sicherheitszeichen-S-+ Protection class I Protection Class I
High welding speed Process-optimized nozzle Maintenance-free, brushless blower Intuitive operation and simple handling For rapid economical strip welding of truck covers and industrial curtains. Very fast strip welder at up to 20 meters per minute.
TAPEMAT 50 mm - 400 V / 10000 W / 16 A CEE-plug Article No.: 129.757 Attribute Unit Value Voltage V~ 3 × 400 Power W 10000 Temperature °C ~ 650 Speed m/min 4 – 20 Welding seam width mm 50 Weld seam width mm 50 Size (L × W × H) mm 555 × 435 × 370 Weight kg 35 Conformity mark CE Certification Approval mark Sicherheitszeichen-S-+ Certification scheme CCA Protection class I Protection Class I
Top welding speed Process-optimized high-precision nozzle Maintenance-free, brushless blower Easy to exchange counter-pressure roller Constant tarpaulin bow tension For rapid economical strip welding of truck covers and industrial curtains. Very fast strip welder at up to 20 meters per minute.
TAPEMAT Spriegel 100 mm - 400 V / 10000 W / 16 A CEE-plug Article No.: 138.229 Attribute Unit Value Voltage V~ 3 × 400 Power W 10000 Temperature °C ~ 650 Speed m/min 4 – 20 Welding seam width mm 100 Size (L × W × H) mm 555 × 435 × 370 Weight kg 40 Conformity mark CE Certification Approval mark Sicherheitszeichen-S-+ Certification scheme CCA Protection class I Protection Class I Weld seam width mm 2 x 20
More consistent and up to three times faster than manual welding Unique semiautomatic welding tool Automatic welding in areas inaccessible to other tools With welding guide, inside nozzle or outside nozzle, the unit is suitable for all roofing applications and other areas of use The unique, semiautomatic welding tool. The flexible concept makes the TRIAC DRIVE AT an all-around tool that is universal in use.
TRIAC DRIVE AT - 230 V / 1700 W / nozzle inside / 30 mm / without grip / EU-plug Article No.: 117.331 Attribute Unit Value Voltage V~ 230 Power W 1600 Temperature °C 40 -650 Speed m/min 0.5 – 3 Size (L × W × H) mm 300 × 230 × 380 Handle ∅ mm 56 Weight kg 4.1 Conformity mark CE Certification Protection class II Schutzklasse II

Ttriac drive a Ttriac -guiding help

למפרט המלא >
כל האביזרים
More consistent and up to three times faster than manual welding Unique semiautomatic welding tool Automatic welding in areas inaccessible to other tools With welding guide, inside nozzle or outside nozzle, the unit is suitable for all roofing applications and other areas of use The unique, semiautomatic welding tool. The flexible concept makes the TRIAC DRIVE AT an all-around tool that is universal in use.
TRIAC DRIVE AT - 230 V / 1700 W / nozzle inside / 30 mm / without Grip / EU-plug Article No.: 117.332 Attribute Unit Value Voltage V~ 230 Power W 1700 Temperature °C 40 -650 Speed m/min 0.5 – 3 Size (L × W × H) mm 300 × 230 × 380 Handle ∅ mm 56 Weight kg 4.1 Conformity mark CE Certification Protection class II Schutzklasse II
Simple operation Lightweight High welding speed Stepless adjustment of temperature and drive Perfect welding result even in harsh environmental conditions thanks to hot-air system. This lightweight tool is optimized for overhead welding and is ideal for thin materials used in civil engineering and tunnel construction. Leister offers a choice between replaceable combi-wedges with or without test channel.
TWINNY S - Civil engineering / 230 V / 2900 W / with test channel / combi-wedge short / EU-plug Article No.: 119.008 Attribute Unit Value Speed (144:1) m/min 1.4 – 4 (6) Welding pressure N 500 Voltage V~ 230 Power W 2900 Temperature °C 80 – 600 Size (L × W × H) mm 350 × 390 × 270 Weight kg 6.5 – 6.9 Conformity mark CE Certification Approval mark Sicherheitszeichen-S-+ Certification scheme CCA Protection class II Schutzklasse II
Simple operation High welding speed Digital display of temperature and velocity Closed-loop control of temperature and drive Perfect welding result even in harsh environmental conditions thanks to hot-air system. The TWINNY T is excellent for welding PVC and other thin or soft membranes. It is available either with or without air-test channel
TWINNY T - Civil engineering / 230 V / 2300 W / with test channel / combi-wedge long / EU-plug Article No.: 107.562 Attribute Unit Value Voltage V~ 230 Power W 2300 Temperature °C 80 – 560 Speed m/min 0.8 – 3.2 Welding pressure N 100 – 1000 Size (L × W × H) mm 340 × 360 × 245 Weight kg 6.9 – 7.9 Conformity mark CE Certification Approval mark Sicherheitszeichen-S-+ Protection class I Protection Class I
Digital display of welding pressure Complete recording of all relevant welding parameters USB memory system Data transfer made simple The TWINNY T is excellent for welding PVC and other thin or soft membranes. It is available either with or without air-test channel. The TWINNY T USB, which makes data storage and display easy with a USB flash memory system, is perfect for critical applications where constant real-time monitoring of primary weld conditions can be stored and displayed.
TWINNY T USB - Civil engineering / 230 V / 2300 W / with test channel / combi-wedge long / EU-plug Article No.: 138.089 Attribute Unit Value Voltage V~ 230 Power W 2300 Temperature °C 80 – 560 Speed m/min 0.8 – 3.2 Welding pressure N 100 – 1000 USB-memory-stick incl. USB memory stick Size (L × W × H) mm 340 × 360 × 245 Weight kg 6.9 – 7.9 Conformity mark CE Certification Approval mark Sicherheitszeichen-S-+ Protection class I Protection Class I
Reproducible results thanks to digital display of set and actual values Electronically controlled heating Steplessly controlled air flow All floor coverings welded without reconfiguration Automatic start Integrated wall switch With the UNIFLOOR E you can weld floor coverings made of PVC-P, PE, linoleum and modified thermoplastics without any reconfiguration, up to 7.5 meters per minute
UNIFLOOR E - 230 V / incl. rod de-reeler / squeezed nozzle (PVC und PUR) / EU-plug Article No.: 138.493 Attribute Unit Value Voltage V~ 230 Power W 2300 Temperature °C 80 - 620 Speed m/min 1.0 – 7.5 Air flow range % 50 – 100 Size (L × W × H) mm 420 × 270 × 215 Weight kg 11 Conformity mark CE Certification Approval mark Sicherheitszeichen-S-+ Certification scheme CCA Protection class I Protection Class I
Electronically controlled heating All floor coverings welded without reconfiguration Automatic start Integrated wall switch With the UNIFLOOR S you can weld floor coverings made of PVC-P, PE, linoleum and modified thermoplastics without any reconfiguration, up to 7.5 meters per minute.
UNIFLOOR S - 230 V / incl. rod de-reeler / squeezed nozzle (PVC und PUR) / EU-plug Article No.: 138.494 Attribute Unit Value Voltage V~ 230 Power W 2300 Temperature °C 80 - 620 Speed m/min 1.0 – 7.5 Air flow range % 50 – 100 Size (L × W × H) mm 420 × 270 × 215 Weight kg 11 Conformity mark CE Certification Approval mark Sicherheitszeichen-S-+ Certification scheme CCA Protection class I Protection Class I
Small, lightweight and handy High welding speed Reproducible welding results Handy, robust case included in delivery Digital display The small, lightweight and handy hot-air welder produces perfect welding results. UNIPLAN E is electronically controlled for reproducible results.
UNIPLAN E 20 mm - 230V / 2300 W / EU-plug Article No.: 114.221 Attribute Unit Value Voltage V~ 230 Power W 2300 Temperature °C 80 - 620 Air flow range % 50 – 100 Speed m/min 1.0 – 7.5 Weld seam width mm 20 Size (L × W × H) mm 420 × 270 × 210 Weight kg 11.5 Conformity mark CE Certification Approval mark Sicherheitszeichen-S-+ Certification scheme CCA Protection class I Protection Class I
Small, lightweight and handy High welding speed Handy, robust case included in delivery The small, lightweight and handy hot-air welder produces perfect welding results
UNIPLAN S 20 mm - 230V / 2300 W / EU-plug Article No.: 115.049 Attribute Unit Value Voltage V~ 230 Power W 2300 Temperature °C 80 - 620 Air flow range % 50 – 100 Speed m/min 1.0 – 7.5 Weld seam width mm 20 Size (L × W × H) mm 420 × 270 × 210 Weight kg 11.5 Conformity mark CE Certification Approval mark Sicherheitszeichen-S-+ Certification scheme CCA Protection class I Protection Class I
Low noise High welding speed Portable and lightweight Easy, comfortable operation Digital display of welding speed and temperature The quiet UNIPLAN WEDGE is the perfect machine for all critical materials. The innovative laser guide ensures flawless welding.
UNIPLAN WEDGE - 20 mm / Laserguide / 230V / 900 W / EU-plug Article No.: 116.972 Attribute Unit Value Voltage V~ 230 Power W 900 Temperature °C 80 – 420 Speed m/min 1.0 – 7.5 Weld seam width mm 20 Size (L × W × H) mm 420 × 270 × 210 Weight kg 11.5 Conformity mark CE Certification Approval mark Sicherheitszeichen-S-+ Certification scheme CCA Protection class I Protection Class I
Controlled technology with display guarantees a constant and reliable weld for a leakproof roof 100% swiss made quality Powder-coated, rust-free stainless steel housing and rustproof components Lightweight and compact Leister’s UNIROOF E 40 mm, the automatic roof welding machine of the new, powerful compact class, makes it convenient and easy to work with single-ply membranes. The new 40 mm nozzle means greater safety with overlap welding. Thanks to 2900 Watt power at only 13A, the tool can be used practically anywhere while providing ample power reserves.
UNIROOF E 40 mm - 230 V / 2900 W / EU-plug Article No.: 147.828 Attribute Unit Value Amperage A 13 Voltage V~ 230 Power W 2900 Frequency Hz 50 / 60 Temperature °C 80 -600 Speed m/min 1 - 5 Weld seam width mm 40 Size (L × W × H) mm 420 × 280 × 210 Weight (incl. cable and additional weights) kg 15.4 Weldable materials PVC, TPO, ECB, EPDM, CSPE Protection class I Protection Class I Conformity mark CE Certification Certification scheme CCA
Fastest, most precise automatic tape welding tool (up to 18 m/min) "e-Drive" operating unit Easy to use Taut tape guidance Kits for converting VARIANT T1 Overlap to 25 or 50 mm TAPE Used for welding reinforcement and anti-vandalism tapes in vehicle tarpaulin production. Thanks to the "e-Drive" operating concept, setting the relevant welding parameters couldn't be easier. The tape holder and the newly developed guide rollers guide the tape under the pressure roller, keeping it taut right up to the final centimeter.
VARIANT T1 BAND 25 mm - 230 V / 3680 W / EU-plug Article No.: 148.963 Attribute Unit Value Voltage V~ 230 Power W 3680 Temperature °C 100 -620 Air flow range % 50 – 100 Speed m/min 1.5 – 18 Weld seam width mm 25 Size (L × W × H) mm 700 × 415 × 85 Weight kg 28 Conformity mark CE Certification Approval mark Sicherheitszeichen-S-+ Certification scheme CCA Protection class I Protection Class I
Top welding speed up to 18 m/min Perfect view into the weld seam Sturdy and durable for professional use Smooth lifting device for precise positioning Simple operation due to «e-Drive» operating concept This tool's top welding speed of up to 18 m/min and its slim, compact design make it a winning choice.
VARIANT T1 - 230 V / 3680 W / 20 mm nozzle / EU-plug Article No.: 141.892 Attribute Unit Value Voltage V~ 230 Power W 3680 Temperature °C 100 -620 Air flow range % 40 – 100 Speed m/min 1.5 – 18 Weld seam width mm 20 Size (L × W × H) mm 500 × 400 × 195 Weight kg 22 Conformity mark CE Certification Approval mark Sicherheitszeichen-S-+ Certification scheme CCA Protection class I Protection Class I
12 m/min maximum welding speed (depending on material) Guide bar for ergonomic handling Maintenance free blower means lower service costs User-friendly display with “e-Drive” (press and turn control) to recall preset and saved welding settings Constant drive with regulated electronics Using the new VARIMAT V2, polymer roofing membranes can be welded more rapidly resulting in lower cost. Users appreciate its streamlined ergonomics and its ease of use. The clearly laid out operating unit‘s „e-drive“ allows for the control of all relevant welding parameters.
VARIMAT V2 - 230 V / 4600 W / EU-plug Article No.: 138.108 Attribute Unit Value Voltage V~ 230 Power W 4600 Temperature °C 100 - 620 Speed m/min 0.7 – 12 Air flow range % 50 - 100 Width of welding nozzle mm 40 Size (L × W × H) mm 640 × 430 × 330 Weight kg 35 Conformity mark CE Certification Approval mark Sicherheitszeichen-S-+ Certification scheme CCA Protection class I Protection Class I
Flexibility – modularly constructed drive rollers can be switched very quickly, an arm variation that can be folded away and innumerable variations of nozzles and welding wheels. Differential in the upper roller prevents folds from forming and enables compact and good-looking welds along curves. Very strong and smooth step motors Test programs to find the ideal welding parameters Very good access and view during welding or tape welding The digital technology of the Leister SEAMTEK 36 gives you the only certainty that every seam is as good as possible. From beginning to end, every step of the welding process is digitally controlled for optimal accuracy and seam integrity. Unbeatable flexibility: switch between three arm variations and innumerable nozzles as well as roller variants depending on your need in the shortest amount of time.
SEAMTEK - 230 V / 3600 W Article No.: 151.162 Attribute Unit Value Voltage V~ 230 Power W 3600 Temperature °C 35 - 700 Drive Speed m/min 0.25 - 22.0 Regulated weld pressure bar 1 - 6.2 Air Pressure Maintained bar 6.2 Size (L × W × H) mm 800 × 1690 × 1700 Weight kg 330
Cuts grooves into of all types of floor coverings Extremely high, two stage cutting speeeds Adjustable guide roller for tracking accuracy Reduced dust particles when used with dust bag Cutting close to the edge possible The GROOVER grooving machine cuts welding grooves into thick, tough floor coverings made of PVC-P, PE and linoleum. The tool glides on three rollers and cuts a uniform grooving depth, even at high speeds.
GROOVER - 230 V / tungsten carbide tipped blade ∅ 110 x 3.5 mm / trapezium profile / EU-plug Article No.: 108.393 Attribute Unit Value Voltage V~ 230 Power W 350 / 700 (2 levels) Speed Level 1 min-1 14 500 (350 W) Speed Level 2 min-1 18 500 (700 W) Groove depth adjustment mm 0 – 4 Size (L × W × H) mm 240 × 205 × 255 Weight kg 6.7 Conformity mark CE Certification Approval mark Sicherheitszeichen-S-+ Certification scheme CCA Protection class II Schutzklasse II